WildFireSat: Enhancing Canada's ability to manage wildfires
Launch: end of
Mission duration: two to five years
Mission status: in development
A Canadian challenge
Eighty-eight percent of Canada's 4 million km2 of forested lands is characterized as boreal forest, and is home to some of the largest and most intense wildfires in the world. Every year, Canada sees about 7,500 wildfires burn over 2.5 million hectares of forest, a territory about half the size of Nova Scotia.
The amount of forest burned by wildfire is projected to double by due to our changing climate, which is causing longer wildfire seasons, more extreme weather conditions and increased droughts.
On average, about 3% of wildfires are very large and uncontrolled. Ultimately, these 3% of wildfires cause about 97% of the burned area. By increasing our capabilities to better anticipate which wildfires have the potential to burn out of control, they can be prioritized for suppression, leading to a drastic reduction in the economic losses related to wildfire.
Canada's cost of fighting wildfires
Canada spends about $1 billion annually combatting wildfires. However, indirect costs may rise to several billion dollars per year stemming from property loss, damaged infrastructure, industrial shutdowns, evacuations, health-related expenses, and economic losses in a variety of sectors including tourism, forestry, and energy. The Fort McMurray wildfire was the most expensive natural disaster in Canadian history, with a total cost of approximately $9 billion.
The WildFireSat mission
The planned WildFireSat mission is an initiative of the Canadian Space Agency (CSA); the Canadian Forest Service (CFS), part of Natural Resources Canada (NRCan); and Environment and Climate Change Canada (ECCC) to monitor all active wildfires in Canada from space on a daily basis.
The primary goal of WildFireSat is to support wildfire management. In addition, it will provide Canadians with more precise information on smoke and air quality conditions. It will further enable us to more accurately measure the carbon emitted by wildfires, an important requirement of international agreements on carbon reporting.
A Canadian initiative
Canada is a world leader in wildfire management and research. Canadian wildfire managers are working to address the challenges of increased wildfire activity through modernization of their tools and policies. Current remote sensing tools are not adequate to obtain the data that wildfire managers need to carry out their challenging tasks. Innovative Canadian technology is now available to build an affordable space solution to provide wildfire managers with the tools they require.
In a country as vast as Canada, observation from space is the only way to get information on all active wildfires, every day, with the precision that wildfire managers need to do their job. WildFireSat will give us a complete inventory of wildfire activity in Canada at a crucial time of the day and an understanding of the regional and inter-annual variations that occur.
WildFireSat will benefit Canadians
WildFireSat will reduce wildfire losses through more precise wildfire monitoring, improving our ability to make informed decisions about defending communities and avoiding unnecessary evacuations. It will allow us to better protect our resources, infrastructure, and environment by providing better situational awareness, particularly near inhabited areas. It will help reduce health problems associated with smoke and air pollution. It will assist in preventing disastrous wildfires through improved decision making. It will solidify Canada as a world leader in wildfire management and research and in the deployment of breakthrough wildfire management technology in space.
Wildfires in Canada are managed in different ways depending on how close they are to people, infrastructure, or cultural and economically valuable locations. This often means that the further north a wildfire is, the more room it has to burn without threatening Canadians. In northern Canada where population is sparse, wildfires are often left to burn, performing their natural function of regenerating these ecosystems. Even still, these remote wildfires need to be watched closely (often by aircraft survey) to ensure they are not approaching vulnerable areas. WildFireSat will allow wildfire managers to stay better informed about the status of wildfires in the North, without the need for constant costly flights.
What will WildFireSat measure?
The WildFireSat system will consist of one or more satellites equipped with infrared sensors that will measure the energy emitted by wildfires. This energy is referred to as Fire Radiative Power (FRP). With FRP information, essential characteristics of wildfires such as fire intensity and rate of spread can be derived. It will also give us accurate data on carbon emission from wildfires.
Improved wildfire management
On any given day with significant wildfire activity, hundreds of wildfires can be burning in one province or territory at the same time. With limited resources available for wildfire suppression, at times wildfires must be prioritized, with only the most critical wildfires being fought. The measurements taken by WildFireSat, together with other information such as wind direction, topography, and dryness of the area, will give wildfire managers the ability to determine which wildfires are high risk and should therefore be prioritized.
Accurate smoke forecasting
Smoke from wildfires can travel great distances and severely degrade air quality. The Fort McMurray wildfire affected air quality for a large area that stretched all the way to Florida.
WildFireSat will be able to provide more accurate data on the smoke coming from wildfires, allowing smoke forecasts to be updated and improved for organizations and citizens that need the information.
Air quality forecasting
ECCC produces daily forecasts of the Air Quality Health Index (AQHI), a scale designed to help Canadians adjust their activity levels depending on their individual health risk from air pollution. Since wildfires are often responsible for reduced air quality, it is necessary to collect better data on wildfires in order to improve the accuracy of the AQHI and other air quality advisories. WildFireSat will offer more precise and timely monitoring of wildfires and their characteristics, as well as further refinement of remote sensing algorithms.
Carbon emission monitoring
A recent estimate suggests that in British Columbia in , emissions directly resulting from wildfire amounted to 150 million tons of carbon dioxide. That is two to three times the emissions from fossil fuel burning and other activities in all categories of that province's greenhouse gas inventory. In Canada, annual carbon emissions from wildfires can equal the annual carbon emissions from burning fossil fuels across the country.
With the information on FRP from WildFireSat, we will be able to calculate how much carbon is released into the atmosphere by wildfire. This data is essential for carbon emission reporting as agreed upon under the United Nations Framework Convention on Climate Change.
Gap in wildfire observations from space
Existing satellites with infrared sensors can observe wildfires. However, for a period of several hours in the afternoon and early evening, none of the required satellite images are currently available. This long blackout period corresponds to the most critical period of wildfire activity, i.e. the late afternoon “peak burn period.” During that period, higher daily temperatures, lower humidity and strong winds often result in a rapid propagation of wildfires.
Dr. Josh Johnston is the principal investigator of the WildFireSat mission. Josh is a forest fire research scientist with NRCan's Canadian Forest Service (CFS), and was formerly a firefighter. His research focuses on the development of remote sensing tools for studying the physical properties of combustion and fire behaviour, as well as the adaptation of remote sensing tools for operational wildfire management. Josh has been collaborating with the CSA since on activities leading up to the realization of WildFireSat.
WildFireSat will support research on the behaviour of wildfires and the emission of carbon, aerosols and other particles that wildfires produce. By providing a key observation of wildfire activity and FRP during the peak burn period, WildFireSat will work with existing satellites to significantly broaden our understanding of how wildfires behave and how that behaviour is changing alongside our climate.
Uncooled infrared sensors
WildFireSat will use infrared sensors to measure energy coming from wildfires. Normally, infrared sensors must be cooled down to extremely low temperatures using heavy cooling equipment with high energy demands. A satellite with such equipment is very large and expensive. One of the unique things about WildFireSat is that it will use an innovative type of infrared sensor, based on microbolometer technology, that does not need to be cooled. The CSA has invested in the development of this technology in recent years through its Space Technology Development Program. The use of this technology drastically reduces the weight and size of the satellite and the amount of power required to operate it, thereby considerably reducing the cost of the satellite.
- Awarding of Phase A contracts:
- Tests using an airplane carrying a sensor similar to the ones WildFireSat will carry: –
- Start of satellite design and construction: beginning of
- Launch: end of
Phase A of the project
In , two separate contracts, each worth $1.2 million, were awarded to Honeywell and MDA, each to lead an industrial team consisting of several companies to execute Phase A of the project in parallel. Phase A is expected to be completed in summer and includes conceptual design, system requirements, and operations requirements for WildFireSat.
WildFireSat data publicly available
All processed and calibrated WildFireSat data will be accessible to the public as soon as it becomes available, in accordance with theCanadian Space Agency’s commitment to open government.
Future possibilities beyond WildFireSat
With multiple sensors in space, we may be able to observe wildfires even more frequently, giving wildfire managers updates throughout the day. This type of very frequent monitoring would be unrealistic with the traditional type of cooled infrared sensor, but is a possibility with the uncooled infrared sensor. Because of their limited physical resource requirements, WildFireSat's uncooled infrared sensors would make an excellent addition to the satellites of tomorrow.
- Science opportunities with WildFireSat
- Monitoring and protecting our ecosystems from space
- Satellites in our everyday lives
- Date modified: